Plan 72446DA
Two-Story Traditional Duplex House Plan with 3-Beds and 1936 Sq Ft Per Unit
Heated S.F.
3,872
Units
2
Width
52'
Depth
56'
Cars
2
Plan Details
  • This traditional duplex that combines practicality with contemporary design. Each unit spans two levels and includes three bedrooms, offering space for families or those needing extra rooms for offices or guests.
  • The open-plan first floor features a great room, kitchen with a central island, and a dining area, perfect for gatherings. A covered patio extends from the kitchen for outdoor living. 
  • Upstairs, the owner’s suite has a private bathroom, walk-in closet, and balcony, while two additional bedrooms share a full bath. A loft provides flexible space for a home office or lounge. 
Unit A
1,936 Sq. Ft.
878 Sq. Ft. 1st Floor
1058 Sq. Ft. 2nd Floor
3 Beds
2 Full Baths
1 Half Bath
1 Vehicle
Attached
286 Sq. Ft.
26' w 56' d 25' 7" h
Unit B
1,936 Sq. Ft.
878 Sq. Ft. 1st Floor
1058 Sq. Ft. 2nd Floor
3 Beds
2 Full Baths
1 Half Bath
1 Vehicle
Attached
286 Sq. Ft.
26' w 56' d 25' 7" h
What's Included
Each plan set is drawn at 1/4"=1' scale and includes the following drawings:
  • Cover Sheet/Artist's Rendering: An artist's drawing of the home, usually viewed from the front, and general construction notes.
  • Elevations: Shows the front, sides, and rear, including exterior materials, trim sizes, roof pitches, etc.
  • Main Floor Plan: Shows placement and dimensions of walls, doors, & windows. Includes the location of appliances, plumbing fixtures, beams, ceiling heights, etc.
  • Second Floor Plan (if any): Shows the second floor in the same detail as the main floor. Includes second floor framing and details. 
  • Foundation Plan: Shows the location of all concrete footings, floor beams, first floor framing, and foundation details. If there is a basement, a basement plan is included which shows all basement details. Foundation types vary; please call to confirm the foundation type of the plan you are interested in.
  • Roof Framing Plan: Shows roof outlines, conventional framing/trusses, beams, roof framing details, etc. Specific details such as fireplaces, stairways, decks, etc. Details are drawn at 1/2" = 1' scale, and appear as needed throughout the prints.
  • Building Section: Shows a cross-section of the home. Shows support members, exterior and interior materials, insulation, and foundation.
  • Electrical Plan: A schematic layout of all lighting, switches, and electrical outlets.
What's Not Included
  • Architectural or Engineering Stamp - handled locally if required
  • Site Plan - handled locally when required
  • Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
  • Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
  • Energy calculations - handled locally when required
* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.

Two-Story Traditional Duplex House Plan with 3-Beds and 1936 Sq Ft Per Unit

  • 3,872

    Heated s.f.

  • 2

    Units

  • 52'

    Width

  • 56'

    Depth

Floor Plan

  • Main Level

  • 2nd Floor

Plan Details

Square Footage Breakdown

  • Total: 3,872 sq. ft.
  • 1st Floor: 1,756 sq. ft.
  • 2nd Floor: 2,116 sq. ft.

Dimensions

  • Width: 52' 0"
  • Depth: 56' 0"
  • Max ridge height: 25' 7"

Beds/Baths

  • Bedrooms: 6
  • Full bathrooms: 4
  • Half bathrooms: 2

Garage

  • Type: Attached
  • Area: 572 sq. ft.
  • Count: 2 Cars
  • Entry Location: Front

Foundation Type

    • Standard Foundations: Crawl

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 9' 0" Second Floor / 8' 0"

Roof

  • Primary Pitch: 3 on 12
  • Framing Type: Stick And Truss
All house plans are copyright ©2024 by the architects and designers represented on our web site

Two-Story Traditional Duplex House Plan with 3-Beds and 1936 Sq Ft Per Unit

  • 3,872

    Heated s.f.

  • 2

    Units

  • 52'

    Width

  • 56'

    Depth

Two-Story Traditional Duplex House Plan with 3-Beds and 1936 Sq Ft Per Unit

  • 3,872

    Heated s.f.

  • 2

    Units

  • 52'

    Width

  • 56'

    Depth

Plan Details

Square Footage Breakdown

  • Total: 3,872 sq. ft.
  • 1st Floor: 1,756 sq. ft.
  • 2nd Floor: 2,116 sq. ft.

Dimensions

  • Width: 52' 0"
  • Depth: 56' 0"
  • Max ridge height: 25' 7"

Beds/Baths

  • Bedrooms: 6
  • Full bathrooms: 4
  • Half bathrooms: 2

Garage

  • Type: Attached
  • Area: 572 sq. ft.
  • Count: 2 Cars
  • Entry Location: Front

Foundation Type

    • Standard Foundations: Crawl

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 9' 0" Second Floor / 8' 0"

Roof

  • Primary Pitch: 3 on 12
  • Framing Type: Stick And Truss

    Main Level

    2nd Floor