This transitional design offers a fresh, modern appearance to a traditional form. The exterior has a mix of brick and board and batten and has wood beams around the covered entry.
The main level is the hub of activity centered around an open concept living-dining area as well as the kitchen. The living room has an 11'-high beamed tray ceiling with a fireplace.
The master suite is conveniently located on the main floor and has a beamed 10' ceiling with a large window grouping on the back wall, a spa-like bath and a large walk-in closet. The main floor also has a guest suite with many uses such as a home work space or study.
Upstairs, you'll find your secondary sleeping spaces for siblings and their sleep over friends. The optional bonus room can be finished, giving you 439 square feet of additional space that can be used for a variety of functions.
Related Plan: Get an alternate exterior with house plan 710348BTZ.
What's Included
Elevations - at 1/4" or 3/16" and the side and rear elevations at 1/8" scale. The elevations show and note the exterior finished materials of the house.
Foundation - every plan is available with a walkout style basement (three masonry walls and one wood framed rear wall with windows and doors). The basement plans are a 1/4" or 3/16" scale layout of unfinished spaces showing only the necessary 2 x 6 wood framed load bearing walls. These plans are completed with dimensions, door/window sizes. Crawlspace and/or slab on grade foundations are available for some plans.
Floor plan - each plan consists of 1/4" or 3/16" scale layouts showing the location of 2 x 4 walls, doors, windows, plumbing fixtures, cabinetry, stairs and decorative ceilings. These plans are complete with dimensions, notes, door/window sizes and a schematic electrical layout.
Building sections - Take vertical cuts throughout the house and the stairs showing floor, ceiling and roof height information.
Floor framing - if included it shows each floor joist indicating the size, spacing and length. All beams are sized and labeled. Each framing plan sheet includes any framing details that are needed (tray details, connections details, etc. All framing is designed using conventional 2 x 10 floor joist or wood I-joist, depending on the span conditions of each home. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Ceiling framing - if included, it shows each ceiling joist indicating the size, spacing and length. All beams are sized and labeled. All of the joists are counted and coordinated with the material list. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Roof framing - if included, shows each rafter, valley, hip and ridge indicating size, spacing and length. All beams are sized and labeled. All of the joists are counted and coordinated with the material list. FRAMING PLANS ARENOT AVAILABLE for all home so please follow up with us for availability.
Details sheets - shows foundation details, typical wall section and other framing details. Also included are miscellaneous interior trim and fireplace details that can be used to customize the home.
What's Not Included
Architectural or Engineering Stamp
Site Plan
Mechanical Drawings (location of heating and air equipment and duct work)
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations)
*
Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping!
Let's go back to the top.
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
×
Please note the following
Your Materials List will match the base plan only. The following options will not be reflected on the materials list:
Transitional House Plan with Main Floor Master and Guest Suite
2,906
Heated s.f.
4
Beds
3.5
Baths
2
Floors
3
Car garage
Floor Plan
Main Level
2nd Floor
Plan Details
Square Footage Breakdown
Total:
2,906 sq. ft.
1st Floor:2,176 sq. ft.
2nd Floor:730 sq. ft.
Dimensions
Width:59' 0"
Depth:76' 0"
Max ridge height:30' 10"
Beds/Baths
Bedrooms:
4
Full bathrooms:3
Half bathrooms:1
Garage
Type:Attached
Area:844 sq. ft.
Count:3 Cars
Entry Location:Side
Foundation Type
Standard Foundations:Walkout, Crawl
Exterior Walls
Standard Type(s):2x4
Ceiling Heights
Floor / Height:
First Floor /
10' 0"
Second Floor /
9' 0"
Are you sure you want to remove this plan from your favorites?
It will be removed from all of your collections.
Price Match Guarantee
If you've found a better price, call us at 1-800-854-7852 or email us at [email protected] with the plan number, price, and where you found it for less. We will match that price and give you an additional 10% discount.
*Our Price Guarantee is limited to house plan purchases within 10 business days of your original purchase date.
×
Block / CMU (main floor)
Most concrete block (CMU) homes have 2 x 4 or 2 x 6 exterior walls on the 2nd story.