Name: Plan 23803JD: Sophisticated Modern House Plan with Open Layout
SKU: 23803JD
Price: 1800.0 USD
Availability: InStock

VIEW ALL

Plan 23803JD

Sophisticated Modern House Plan with Open Layout

Heated S.F.

2,783

Beds

3

Baths

3.5

Stories

3

Cars

2

Floor Plan

Main Level

Second Level

Lower Level

Plan Details

Clean lines blend with metal accents to create this sophisticated and bold, modern house plan. The character-defining flat and sloped roof lines set this house apart from others in the area.
An open-concept floor plan can be found on the main level, combining the kitchen, dining and living rooms into one, shared space. A large island anchors the space and a cozy fireplace can be enjoyed throughout.
Sliding doors lead to a covered deck encouraging a closer bond with nature.
Upstairs, discover the master bedroom, which is effortlessly simple and serene. A large walk-in closet resides across from the master bathroom, featuring a separate tub and shower, two sinks, and a pocket door leading to the commode room.
Two secondary bedrooms, across the hall, share a Jack-and-Jill bathroom, and the laundry room is centrally located for added convenience.
The lower level is where you'll find the formal entry and the 2-car garage. A fourth bedroom with access to a patio, and a powder bath, also reside on this level.
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

2,783 sq. ft.

Lower Level:

594 sq. ft.

1st Floor:

1,021 sq. ft.

2nd Floor:

1,168 sq. ft.

Beds/Baths

Bedrooms:

3

Full bathrooms:

3

Half bathrooms:

1

Foundation Type

Standard Foundations:

Slab

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

32' 0"

Depth:

41' 0"

Max Ridge Height:

34' 0"

Garage

Type:

Drive Under

Area:

417 sq. ft.

Count:

2 Cars

Entry Location:

Side

Ceiling Heights

Lower Level

8'

First Floor

9'

Second Floor

8'

Roof Details

Primary Pitch:

3 on 12

Secondary Pitch:

1 on 12

Framing Type:

Stick

Architectural Style

Contemporary

Modern

Northwest

Special Features

Butler Walk-in Pantry

Jack & Jill Bath

Laundry - Upstairs

Master Suite - 2nd Floor

Plan Collections

Photo Gallery

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.