Plan 16893WG
Narrow Rugged House Plan with Rear Lanai
Heated S.F.
1,917
Beds
2-3
Baths
2
Stories
1-2
Cars
3
Plan Details
  • This rugged-looking house plan has a covered entry with decorative timber trusses, a garden under a pergola and great covered lanai in back.
  • Inside, it gives you 2 or 3 bedrooms depending on how you use the room off the foyer (i.e. as a study or a bedroom).
  • The foyer takes you to the dynamic layout with the kitchen open to both the family room and dining room.
  • With an angled back wall, the family room draws your attention to the fireplace in the corner. Windows on the right wall give you great views and natural light.
  • The master suite has views in two directions and a large walk-in closet. Laundry is conveniently located nearby.
  • The upstairs gives you great expansion space and the tandem garage give you lots of storage space if you don't fill them with vehicles.
What's Included
  • Floor Plans – ¼”=1’-0” scale floor plan indicating location of frame and masonry walls, support members, doors, windows, plumbing fixtures, cabinets, shelving, ceiling conditions and notes deemed relevant to this plan.
  • Exterior Elevations – All elevations at ¼” = 1’-0” scale in most cases.  Some older designs may contain 1/8” scale side and rear elevations. Drawing will indicate overall configuration of home at each side view and make note of plate heights, roof overhangs, window header heights, roof pitches, materials used and extent to which they are used and enlargement of any details we feel necessary to explain the construction.
  • Building Sections – ¼” = 1’-0” building sections are included when there is no other reasonable way to indicate the volumetric/height conditions in the home.  Most of this information can usually be determined from the exterior elevations.
  • Cabinet Elevations – 3/8” = 1’-0” scale elevations indicating configuration of cabinets, heights, widths, type of components used, cabinet material and finish, counter surfaces, appliances,
  • Framing Plans – ¼” – 1’-0” scale framing plans indicating size and spacing of members as well as bracing and blocking required for structural purposes. Local codes will most likely need to be consulted.
  • Foundation Plans – ¼” = 1’-0” scale foundation plans indicating location of structural walls, grade beams, reinforcing steel and structural columns.  Consulting a local engineer is advisable as well as is analysis of soil conditions on site.
  • Electrical Plans – ¼” = 1’-0” scale schematic plans indicating location and types of electrical fixtures, switches, outlets, and how they are to be switched.  Plans do not include circuiting or wire sizing.  Plans will also include specialty items such as hose bibs, gas connections, location of a/c equipment, return air vents or other mechanical/electrical/plumbing items which need to be located.
What's Not Included
  • Architectural or Engineering Stamp - handled locally if required
  • Site Plan - handled locally when required
  • Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
  • Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
  • Energy calculations - handled locally when required
* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.

Narrow Rugged House Plan with Rear Lanai

  • 1,917

    Heated s.f.

  • 2-3

    Beds

  • 2

    Baths

  • 1-2

    Floors

  • 3

    Car garage

Floor Plan

  • Main Level

  • Bonus

Plan Details

Square Footage Breakdown

  • Total: 1,917 sq. ft.
  • 1st Floor: 1,917 sq. ft.

Dimensions

  • Width: 50' 0"
  • Depth: 88' 5"
  • Max ridge height: 33' 0"

Beds/Baths

  • Bedrooms: 2 or 3
  • Full bathrooms: 2

Garage

  • Type: Attached
  • Area: 709 sq. ft.
  • Count: 3 Cars
  • Entry Location: Front

Foundation Type

    • Standard Foundations: Crawl, Slab
    • Optional Foundations: Basement

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 8' 1" Second Floor / 9' 0"

Roof

  • Primary Pitch: 10 on 12
  • Framing Type: Stick
All house plans are copyright ©2024 by the architects and designers represented on our web site

Narrow Rugged House Plan with Rear Lanai

  • 1,917

    Heated s.f.

  • 2-3

    Beds

  • 2

    Baths

  • 1-2

    Floors

  • 3

    Car garage

Narrow Rugged House Plan with Rear Lanai

  • 1,917

    Heated s.f.

  • 2-3

    Beds

  • 2

    Baths

  • 1-2

    Floors

  • 3

    Car garage

Plan Details

Square Footage Breakdown

  • Total: 1,917 sq. ft.
  • 1st Floor: 1,917 sq. ft.

Dimensions

  • Width: 50' 0"
  • Depth: 88' 5"
  • Max ridge height: 33' 0"

Beds/Baths

  • Bedrooms: 2 or 3
  • Full bathrooms: 2

Garage

  • Type: Attached
  • Area: 709 sq. ft.
  • Count: 3 Cars
  • Entry Location: Front

Foundation Type

    • Standard Foundations: Crawl, Slab
    • Optional Foundations: Basement

Exterior Walls

  • Standard Type(s): 2x6

Ceiling Heights

  • Floor / Height: First Floor / 8' 1" Second Floor / 9' 0"

Roof

  • Primary Pitch: 10 on 12
  • Framing Type: Stick

    Main Level

    Bonus