Name: Plan 23034JD: Multi-gabled 5-Bed Home Plan with Deep Bracketed Eaves
SKU: 23034JD
Price: 2400.0 USD
Availability: InStock

VIEW ALL

Plan 23034JD

Multi-gabled 5-Bed Home Plan with Deep Bracketed Eaves

Heated S.F.

4,243

Beds

4-5

Baths

4.5

Stories

2

Cars

3

Floor Plan

Main Level

2nd Floor

Plan Details

This 5-bed home plan has multiple gables with deep eaves and decorative brackets. The exterior has a mix of clapboard and board and batten siding and a touch of stone that combine to give it great curb appeal.
A den and powder room are on opposite sides of the foyer which leads you to the open floor plan beyond.
The kitchen has a large island and a walk-in pantry. There is also a butler's pantry that connects the kitchen to the dining room. Sliding doors on the back wall take you to a covered patio giving you a great spot to eat al fresco.
The 2-story great room has views to the back - and to the kitchen - and a fireplace flanked by built-ins.
The room in the back-right corner can be used as a fifth bedroom or as a guest room. When not in use as a bedroom, it could make a great work-from-home space.
At the top of the stairs, a loft overlooks the great room below. Across the way, a pair of doors opens to a vaulted flex room which makes a great media room, home theater or play room.
Three bedrooms line the right side of the home, all of which have walk-in closets. The master suite occupies the entire left side of the home and has a five-fixture bath and a huge walk-in closet. Having the laundry room upstairs is a great convenience.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

4,243 sq. ft.

1st Floor:

2,067 sq. ft.

2nd Floor:

2,176 sq. ft.

Beds/Baths

Bedrooms:

4 or 5

Full bathrooms:

4

Half bathrooms:

1

Foundation Type

Standard Foundations:

Crawl

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

64' 0"

Depth:

64' 0"

Max Ridge Height:

31' 1"

Garage

Type:

Attached

Area:

736 sq. ft.

Count:

3 Cars

Entry Location:

Front

Ceiling Heights

First Floor

10'

Second Floor

9'

Roof Details

Primary Pitch:

4 on 12

Framing Type:

Truss

Architectural Style

Special Features

Butler Walk-in Pantry

Master Suite - 2nd Floor

Plan Collections

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.