Name: Plan 23852JD: Expanded Craftsman House with 3-Car Angled Garage
SKU: 23852JD
Price: 2000.0 USD
Availability: InStock

VIEW ALL

Plan 23852JD

Expanded Craftsman House with 3-Car Angled Garage

Heated S.F.

3,230

Beds

4

Baths

4

Stories

2

Cars

3

Floor Plan

Main Level

2nd Floor

Plan Details

An eye-grabbing entry greets you to this dramatic Craftsman home plan designed in response to requests for larger versions of house plan 23252JD.
A 2-story foyer and great room creates a unique bridge on the second floor separating the bedroom suites. Views from the bridge encompass the great room below.
You'll find a large island in the kitchen which is open to the dining room with a coffered ceiling and access to the covered outdoor space in back.
The master bedroom has views to the back that open to the large covered deck. The den can be used as an extra bedroom if needed.
Upstairs, you'll find three beds and two baths and a large bonus area (note, the bonus area is factored into the total living area).
Related Plans: Get a smaller version with house plan 23252JD (2,815 sq. ft.) and get a finished lower level with house plan 23253JD.
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

3,230 sq. ft.

1st Floor:

2,075 sq. ft.

2nd Floor:

1,155 sq. ft.

Beds/Baths

Bedrooms:

4

Full bathrooms:

4

Foundation Type

Standard Foundations:

Crawl

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

90' 0"

Depth:

80' 0"

Max Ridge Height:

26' 6"

Garage

Type:

Attached

Area:

1035 sq. ft.

Count:

3 Cars

Entry Location:

Front

Ceiling Heights

First Floor

9'

Second Floor

9'

Roof Details

Primary Pitch:

8 on 12

Secondary Pitch:

4 on 12

Framing Type:

Truss

Architectural Style

Special Features

Butler Walk-in Pantry

Den

Laundry - Main Level

Master Suite - 1st Floor

Mudroom

Two Story Great Room

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.